As an Amazon Associate this site earns from qualifying purchases.
Quick Picks
| Product | Best For | Listing-Stated Capacity | Price |
|---|---|---|---|
| Buyers Products LT10 Landscape Trailer Trimmer Rack | Open trailers, lockable trimmer storage | Up to 3 trimmers | Check Price on Amazon |
| ELITEWILL Adjustable Trailer Backpack Blower Rack Holder with Lock | Backpack blower transport | Backplate adjusts 18.5–23.62 in | Check Price on Amazon |
| MEWSDEN Trailer Racks for Lawn Equipment | Shovels, rakes and hoes | Up to 6 straight-handled tools | Check Price on Amazon |
| ELITEWILL 4-Place Weed Eater Racks for Open Trailer | Bolt-on mounting to open trailer side rails | 4 trimmers | Check Price on Amazon |
| Bastion Distribution Top-Wind Swivel Trailer Jack | Weld-on tongue jack duty | Rated up to 5000 lbs | Check Price on Amazon |
As an Amazon Associate, we earn from qualifying purchases.
Last Updated: September 2026
A work trailer is a rolling toolbox, and the difference between a crew that loads out in four minutes and one that loads out in fifteen usually comes down to hardware bolted to the rails. Trimmer racks. A blower holder. A shovel rack that keeps long handles from sliding into the mower deck. A tongue jack that actually lifts the loaded tongue.
This roundup reads the published listing specifications for ten trailer accessories aimed at lawn care and landscape work — capacities, mounting methods, clearances, locking hardware — and tells you which buyer each one fits. This website does not do hands-on testing, so nothing below is a use report. Everything is drawn from the retailer listings and attributed to whoever published it.
Here is the thing about rack shopping: almost every listing says "heavy duty" and "rust proof." What actually separates these products is capacity, mounting method, and whether the fasteners come in the box. Those are the details we focused on.
- Lockable Trimmer Rack: Our Trimmer Rack mounts to any open style trailer and hold up to 3 trimmers; The rack includes locks to keep your trimmers secure and your trailer organized
- Secure and Sturdy: This trimmer rack features an easy snap in design; Made of black powder coated steel to resist rust and stay strong; Vinyl-coated hooks protect trimmers from
- Product Dimensions: Base length: 14.76inch; Base width: 14.96inch; Backplate Height Adjustment Range: 18.5-23.62inch.Please confirm compatibility with your blower prior to ordering
- Universal Compatibility: Adjustable Backpack Blower Rack fit for all styles and brands backpack blowers compatible with STIHL Backpack Blowers BR 350, BR 430, BR 600, BR 700, BR
- Functional and pragmatic: The trailer tool rack offers a dependable storage solution for your lawn equipment. With its adjustable design, it accommodates up to six
- High-quality Material: The landscape hand tool rack features a thick steel plate with a black powder coating, providing resistance to deformation, rust, and wear. Made of durable
- 4-place weed eater storage for landscape trailers.The trimmer rack fits open trailers, holding and transporting straight-shaft weedeaters,pole edges, pole hedge clippers and brush
- Lockable design secures your expensive tools against theft.Comes with built-in lockable hasp to install padlocks easily. The weed wacker holder firmly fastens your trimmer on
- Reliable Lifting Power: Designed to handle up to 5000lbs, this jack provides dependable support for heavy trailers, ensuring smooth operation in any towing scenario
- Commercial-Grade Strength: Heavy-duty 4 place trailer trimmer rack with commercial-grade construction for landscapers, contractors, and homeowners who want a sturdier, more secure
- Rust-Resistant & Long-Lasting Durability:ELITEWILL weed eater racks are built from heavy-duty alloy steel for greater strength, stability, and a more solid feel than flimsy
- 【Widely Applicable】This trimmer rack for enclosed trailer works great as a weed eater rack for trailer or inside your shed and garage. Whether you need a trimmer rack for trailer
- 【Keep Tidy & Organized】As a reliable weed trimmer racks for trailers setup, it holds up to 3 trimmers, edgers, or hedge trimmers. This weed wacker rack for trailer keeps your
- 【ENHANCED SAFETY】Both side racks are thick hasp with strong spring. Theft proof locks can prevent weed eaters from falling on bumpy, carabiners are second optional safety design
- 【ENOUGH SPACE】6.57'' reserved trimmer rack's pole to truck wall, compatible with lawn care equipment of different size without getting stuck by wall. 12.6 inch between two weed
How We Research
Every fact in this article comes from two source types: Amazon Creators API verified product records and the product listing feature bullets for each ASIN, all retrieved on 2026-09-10. We read each listing's bullets in full, separated genuine specifications (dimensions, capacities, clearances, included hardware) from marketing adjectives, and compared only like-for-like attributes across products.
No one here installed, loaded, towed or stress-tested any of this hardware. Where a listing does not state something — a weight rating, a lock's inclusion, a bolt pattern — we say so rather than guessing, because a missing field on a retail listing does not mean the manufacturer never publishes it.
The Picks, Reviewed
Buyers Products LT10 Landscape Trailer Trimmer Rack — Best for open landscape trailers that want a lockable three-trimmer rack
Buyers Products states the LT10 mounts to any open-style trailer and holds up to three trimmers, with locks included to secure them (padlock not included). That parenthetical matters: budget for a padlock at the same time you order, or the anti-theft feature sits idle in your shop.
The listing describes an easy snap-in design with one-hand operation, stainless steel springs, vinyl-coated hooks, mounting hardware included, and a black powder coat finish. Read those together and you get the practical picture — a rack you can load with one hand while the other holds the trimmer, with hooks that are coated specifically so a shaft riding on rough pavement is not scuffing bare steel. Stainless springs are a sensible spec on a part that lives outdoors and gets cycled several times a day; they are less likely to seize with rust than plated carbon springs, though the listing does not publish a cycle rating.
The same listing says Buyers Products was founded in 1946. Take that as company background from the seller, not as a durability guarantee.
Pros
- Holds up to three trimmers on any open-style trailer, per the manufacturer listing
- Locks are included with the rack
- Snap-in design rated for one-hand operation
- Stainless steel springs and vinyl-coated hooks
- Mounting hardware included
- Padlock is not included
- Described for open-style trailers; the supplied listing does not state an enclosed-wall mounting configuration
Verdict: The pick for an open landscape trailer where trimmers get pulled and replaced dozens of times a day and one-hand loading is worth real money.
ELITEWILL Adjustable Trailer Backpack Blower Rack Holder with Lock — Best for hauling a backpack blower without letting it tip
Backpack blowers are the awkward one. They are top-heavy, expensive, and they do not clip to anything designed for a straight shaft. ELITEWILL lists a base length of 14.76 inches, a base width of 14.96 inches, and a backplate height adjustment range of 18.5 to 23.62 inches, and asks buyers to confirm compatibility with their blower before ordering. Measure your blower's footprint and back height before you click buy — that instruction is on the listing for a reason.
The listing names compatibility with STIHL BR 350, BR 430, BR 600, BR 700 and BR 800 backpack blowers (including C-E and X versions), Husqvarna 150BT, 350BT, 570BTS and 580BTS, and ECHO PB-580T, PB-755ST, PB-770T, PB-8010T and PB-9010T. Pre-drilled holes on the base and back panel are listed for landscape trucks, open trailers, enclosed trailers, garages and wall-mounted setups, with all installation accessories and an installation guide included. A rotating buckle at the top is secured with one included lock, and ELITEWILL says the lid cannot be opened when locked.
The frame-style enclosure is the design argument here: instead of hanging the blower by its frame, the rack wraps it. That is an inference about handling, not something measured here, but a wrapped enclosure gives a heavy blower fewer directions to swing on a rough haul road.
Pros
- Backplate adjusts across a 18.5–23.62 inch range for different blower heights
- Named compatibility across STIHL, Husqvarna and ECHO backpack models
- Pre-drilled base and back panel suit open trailers, enclosed trailers and shop walls
- One lock is included with the rotating buckle
- Installation accessories and a guide are in the box
- The listing explicitly asks you to confirm blower compatibility before ordering, so odd-shaped or discontinued blowers may not seat
- Sized around a single blower rather than multiple units
Verdict: Buy it if you run one of the listed STIHL, Husqvarna or ECHO backpack blowers and you are tired of it riding loose in the trailer nose.
MEWSDEN Trailer Racks for Lawn Equipment — Best for shovels, rakes and other long straight handles
Trimmer racks do not solve the shovel problem. MEWSDEN says the rack accommodates up to six straight-handled tools and has six round holes fitted with noise-reduction rubber. Those grommets are the interesting spec: rubber in the hole means the handle is not resting metal-on-metal, which the seller frames as noise reduction and wear protection.
The listing describes a thick steel plate with black powder coating made of carbon structural solid steel, with a reinforced base. MEWSDEN lists it as adaptable to trailers, trucks, mowers, open-style flat trailers, landscape trucks and UTVs, as well as warehouses, farm barns and yards. That breadth is a fitment claim from the seller, not a confirmed bolt pattern for your specific rail, so measure before you commit.
Installation is described as assembling three rectangular shelves, then punching holes and tightening screws to mount the rack. Translation: this is a drill-and-bolt job, not a clamp-on. If you are not willing to put holes in your trailer, look elsewhere.
Pros
- Holds up to six straight-handled tools such as shovels, rakes and hoes
- Six holes lined with noise-reduction rubber
- Thick powder-coated carbon structural steel plate with a reinforced base
- Listed for trailers, landscape trucks and UTVs as well as shop and barn use
- Mounting requires punching holes and screwing the rack down
- Designed around straight handles, so D-handle and bent-shaft tools may not drop through cleanly
Verdict: The right buy for a crew whose hand tools keep migrating under the mowers — six handles, upright, with rubber where the wear happens.
ELITEWILL Weed Eater Rack for Open and Enclosed Trailers Garage Wall — Best for one rack that can move between an open trailer, an enclosed trailer and a shop wall
ELITEWILL describes this as a heavy-duty four-place trailer trimmer rack built from heavy-duty alloy steel with a premium outdoor coating that resists rust and fading. The mounts are described as detachable and height adjustable for open and enclosed trailers, garages and sheds, with upgraded spring clips and a locking system, and all hardware plus instructions included for bolt-on mounting.
Detachable, height-adjustable mounts are the reason to consider this one over a fixed-geometry rack. If you swap trailers seasonally, or you want the rack on the enclosed trailer in summer and on the shop wall over winter, adjustable mounting hardware is what makes that realistic without fabricating spacers.
What the supplied listing information does not state is the spacing between trimmer positions or the overall rack dimensions. If your trimmer heads are wide — brush cutters especially — that unknown is worth resolving with the seller before ordering.
Pros
- Four trimmer positions
- Detachable, height-adjustable mounts for open trailers, enclosed trailers, garages and sheds
- Spring clips plus a locking system to resist rotation and vibration in transit
- All mounting hardware and instructions included
- The supplied listing information does not state position spacing or overall dimensions
Verdict: Best for the operator who wants four places and the flexibility to relocate the rack between trailers and the shop wall.
ELITEWILL 4-Place Weed Eater Racks for Open Trailer — Best for a straightforward bolt-on to standard open trailer side rails
ELITEWILL lists four-place storage for straight-shaft weedeaters, pole edgers, pole hedge clippers and brush cutters carried upright. That is a wider tool list than most trimmer racks publish, and it matters if your crew runs pole saws and hedge clippers alongside string trimmers.
The pre-drilled mounting base is described as aligning with most standard open trailer side rails, with attached angle iron and complete mounting hardware included for setup without extra cutting. Angle iron backing spreads the load across the rail rather than concentrating it at the bolt holes — a reasonable inference about why the seller mentions it, though no load rating is published.
A built-in lockable hasp accepts padlocks, and 360-degree non-slip padded clips are listed to hold shafts and reduce bumping noise. The listing describes thick reinforced steel with anti-scratch powder coating rated by the seller to resist rain, mud and UV.
Pros
- Four places sized for straight-shaft trimmers, pole edgers, pole hedge clippers and brush cutters
- Pre-drilled base with attached angle iron and complete mounting hardware
- Built-in lockable hasp for padlocks
- 360-degree padded clips to reduce shaft abrasion and rattle
- Described for open trailers; the supplied listing does not state an enclosed-wall configuration
- The listing does not state that a padlock is included with the hasp
Verdict: A strong default for an open utility trailer with standard side rails and a mixed fleet of pole tools.
WooFog Weed Eater Rack for Enclosed Trailer — Best for enclosed trailer walls where head clearance is the problem
Inside an enclosed trailer, the failure mode is different: trimmer heads grinding against the wall panel every time you hit a seam. WooFog says this rack holds up to three trimmers, edgers or hedge trimmers and maintains a full 5-inch protective gap from the wall. That published clearance is the single most useful number on the listing.
The listing describes a spring-loaded clip that locks each trimmer in place and pre-drilled bases for bolting the rack to a wall, and says it also stores rakes, shovels and pole saws. So it is not strictly a trimmer rack — long-handled tools are within the seller's stated use.
One gap to note: the supplied listing information does not state a padlock hasp or included lock. If theft protection at unattended job sites is a requirement, treat this as an organization rack and secure the trailer itself.
Pros
- Holds up to three trimmers, edgers or hedge trimmers
- Published 5-inch gap from the wall to keep heads off panels
- Spring-loaded clip per position
- Pre-drilled bases for bolting to a wall; also listed for rakes, shovels and pole saws
- The supplied listing information does not state an included lock or padlock hasp
- Wall mounting means drilling into your trailer's interior wall
Verdict: Pick this when the trailer is enclosed and you want a published wall clearance figure rather than a guess.
Weed Eater Rack for Enclosed Trailer with Locks, 4 Place Weedeater Rack — Best for buyers who want the spacing numbers published up front
This is the listing that actually publishes its geometry. This four-place rack lists 6.57 inches of reserved space from the rack pole to the wall and 12.6 inches between two weed eaters to prevent collision. Do the arithmetic on your own tools: if your trimmer heads measure more than about a foot across, four of them are going to touch regardless of what any rack claims.
Both side racks use a thick hasp with a strong spring, theft-proof locks, optional carabiners as a second safety design, and 360-degree sponge padding. The Weed Eater Rack for Enclosed Trailer with Locks, 4 Place Weedeater Rack listing describes carabiners only as a second optional safety design; it does not state that carabiners are supplied with the rack or rate them for rough-road retention.
Read the fine print before ordering, though. The listing states that bolts for open trailers are NOT included because open trailer sizes differ, and recommends expansion screws for concrete walls and expansion screws without cap for wood walls. For an open trailer install, source your own hardware.
Pros
- Four places with published 12.6-inch spacing between positions
- 6.57 inches of reserved clearance from pole to wall
- Thick spring hasps with strong springs and theft-proof locks; the listing describes carabiners as a second optional safety design without stating they are included
- Premium carbon steel with powder coating; listed for enclosed trailers, open trailers and garages
- Bolts for open trailer mounting are explicitly not included
- Wall installs use expansion screws for concrete walls and expansion screws without cap for wood walls; the listing does not state whether those screws are supplied
Verdict: Best for the buyer who wants to check spacing against their own trimmer heads before ordering — and who does not mind sourcing open-trailer bolts.
Weedeater Rack for Trailer with Lock, 3 Place Weed Eater Rack — Best for open trailers where you would rather clamp than drill
The three-place version is built from premium carbon steel with powder coating and uses a rectangular hollow section that the seller says will not bend like a U-shape section over years of use. That is a structural argument worth understanding: a closed rectangular tube resists twisting better than an open U-channel of similar wall thickness, which is why the seller leans on it.
Its two-piece clamp base can clamp to a vertical bar on an open trailer, clamp to a horizontal bar with drilling required, or clamp to a vertical bar with drilling into the trailer floor. The vertical-bar option is the headline: on a trailer you would rather not perforate, clamping is the low-commitment install.
Retention is handled by thick hasps on both side racks with locks, a thickened hook on the non-locking position, and 360-degree sponge padding to protect shafts from scratches and bending.
Pros
- Rectangular hollow section construction resists the bending the seller attributes to U-shape sections
- Two-piece clamp base offers three mounting paths, including a no-drill vertical rail clamp
- Thick lockable hasps plus a thickened non-locking hook
- 360-degree sponge padding on each position
- Horizontal-bar and floor-mounted installs still require drilling
- Described for open trailers rather than enclosed walls
Verdict: The one to get for three trimmers on an open trailer when you want a clamp-on option instead of committing to holes.
Weedeater Rack for Trailer with Lock, 2 Place Weed Eater Rack — Best for solo operators who only need two trimmer positions
Two places is the right answer more often than the internet admits. A solo operator running a string trimmer and an edger does not need a four-place rack eating rail length that a hand-tool rack could use instead.
The two-place model shares the rectangular hollow section carbon steel construction, powder coating, thick lockable hasps and 360-degree sponge padding of its three-place sibling. It uses the same two-piece clamp base, so it can go on a vertical rail without drilling or on a horizontal rail with drilling.
The practical takeaway: same hardware, two positions instead of three. The supplied listing information for the Weedeater Rack for Trailer with Lock, 2 Place Weed Eater Rack does not state its dimensions or any rail-length requirement, so if you are laying out a utility trailer setup for a lawn business where every foot of rail is spoken for, measure your rail and confirm the rack's footprint with the seller before ordering.
Pros
- Two trimmer positions; the supplied listing does not state dimensions
- Rectangular hollow section carbon steel with rust-resistant powder coating
- Lockable hasps and 360-degree sponge padding
- Flexible two-piece clamp base with a no-drill vertical rail option
- Only two positions, so a growing crew will outgrow it
- Horizontal-rail mounting requires drilling
Verdict: For a one-truck operation with a trimmer and an edger, this is a two-place rack with lockable hasps and a clamp base — measure your rail first, since the supplied listing does not state the rack's dimensions.
Bastion Distribution Top-Wind Swivel Trailer Jack — Best for a weld-on tongue jack on an equipment or utility trailer
Not every accessory hangs on a rail. Bastion Distribution rates this top-wind swivel jack to handle up to 5000 lbs. The product name describes it as a weld-on pipe mount jack for utility, boat, RV, camper and equipment trailers with steel construction.
Two things follow from that description. First, weld-on means welding: this is not a bolt-through swap for a homeowner without access to a welder or a shop. Second, a 5000 lb capacity figure is the jack's rating, not a statement about your trailer. Tongue weight, coupler rating and the trailer manufacturer's own limits are separate numbers, and the correct jack is chosen against those — confirm them with your trailer's documentation before ordering.
The supplied listing information for this jack is thin. It does not state lift travel, retracted or extended height, pipe diameter, or handle length. Every one of those matters for fitment, so treat this as a candidate to verify with the seller rather than a confirmed drop-in.
Pros
- Rated by the seller to handle up to 5000 lbs
- Top-wind swivel design with steel construction
- Listed for utility, boat, RV, camper and equipment trailers
- Weld-on pipe mount, so installation requires welding
- The supplied listing information does not state lift travel, mounting pipe diameter or overall heights
Verdict: Suitable for an owner with welding access who has already confirmed the jack's rating against their trailer's tongue weight and mount.
What to Look For in Lawn Care Trailer Accessories
- Capacity you will actually use. Two, three and four-place racks all appear above. Count your straight-shaft tools, then add one, not four.
- Mounting method. Clamp bases can go on a vertical rail without drilling; pre-drilled plates and shovel racks need holes. Decide up front whether you are willing to perforate your trailer.
- Included fasteners. Some listings include complete mounting hardware; at least one explicitly excludes open-trailer bolts. Read that line before you plan an install afternoon.
- Published clearance. For enclosed trailers, a stated gap from the wall is the number that keeps heads off your panels. Two listings above publish one; most do not.
- Lock hardware, precisely. "Lockable" and "lock included" are different claims. Check which one the listing makes.
- Padding at contact points. Vinyl-coated hooks, sponge sleeves and rubber grommets all address the same wear problem in different ways.
- Fit verification. Seller compatibility lists are a starting point, not a guarantee for your exact trailer or tool. Measure, and confirm anything unclear with the manufacturer.
Recommendations by Use Case
Open landscape trailer, three trimmers, fast turnover: the Buyers Products LT10, because its listing pairs a three-trimmer capacity with an easy snap-in design rated for one-hand operation, stainless springs and included mounting hardware.
Enclosed trailer where heads keep hitting the wall: the WooFog rack, on the strength of its published full 5-inch protective gap from the wall.
You want to check spacing against your own tools first: the four-place rack that publishes 6.57 inches of pole-to-wall clearance and 12.6 inches between positions — just remember open-trailer bolts are not included.
No-drill install on an open trailer: the two-piece clamp base on the 2 Place and 3 Place rectangular-section racks, which can clamp to a vertical bar without drilling.
Backpack blower haulers: the ELITEWILL blower rack, if your blower is on its named STIHL, Husqvarna or ECHO compatibility list and fits the 18.5–23.62 inch backplate range.
Hand tools: the MEWSDEN rack, for up to six straight-handled tools in rubber-lined holes.
Tongue hardware: the Bastion Distribution jack, but only with welding access and confirmed trailer specifications.
Final Verdict
If you are outfitting one trailer and want the least ambiguity, start with the Buyers Products LT10 for trimmers and the MEWSDEN rack for shovels and rakes. Between them, three trimmers and six long handles come off the deck, and both publish exactly what they hold. The Buyers Products LT10 Landscape Trailer Trimmer Rack listing states that mounting hardware is included. The MEWSDEN Trailer Racks for Lawn Equipment listing describes mounting by punching holes and tightening screws, and does not state that fasteners are supplied.
Going bigger? The four-place options are where capacity lives, and the pair of rectangular hollow section racks are the ones to look at if drilling your trailer is off the table. The blower rack is a specialist purchase — excellent if your blower is on its compatibility list, pointless if it is not.
One closing caution: every fitment statement above is the seller's, not a confirmed measurement of your trailer. Confirm rail dimensions, tool head width and, for the jack, your trailer's own tongue and mount specifications before ordering.
Frequently Asked Questions
Do trimmer racks come with a padlock? It varies by listing, so check each one. The Buyers Products LT10 Landscape Trailer Trimmer Rack listing includes locks but states the padlock is not included. The ELITEWILL Adjustable Trailer Backpack Blower Rack Holder with Lock is described as secured with 1 included lock. The ELITEWILL 4-Place Weed Eater Racks for Open Trailer listing describes a built-in lockable hasp to install padlocks easily, without stating whether a padlock is supplied.
Can I install a trimmer rack without drilling my trailer? Sometimes. The two-piece clamp base on the rectangular hollow section racks can clamp to a vertical bar on an open trailer, clamp to a horizontal bar with drilling required, or clamp to a vertical bar with drilling into the trailer floor. Other racks here describe different mounting methods, so check each listing's stated installation instructions before ordering.
What holds shovels and rakes on a landscape trailer? A dedicated hand-tool rack. MEWSDEN says its rack accommodates up to six straight-handled tools and has six round holes fitted with noise-reduction rubber, which addresses both storage and handle wear.
Will a rack fit my enclosed trailer wall? Check the published clearance and hardware notes. The four-place rack in this list states 6.57 inches of reserved space from the rack pole to the wall and 12.6 inches between two weed eaters, and recommends expansion screws for concrete walls and expansion screws without cap for wood walls.
How do I carry a backpack blower safely on a trailer? Use a rack sized for your specific blower. ELITEWILL lists a base length of 14.76 inches, a base width of 14.96 inches, and a backplate height adjustment range of 18.5 to 23.62 inches, and asks buyers to confirm compatibility with their blower before ordering.
Is a 5000 lb trailer jack enough for my trailer? That depends on your trailer, not on the jack alone. Bastion Distribution rates this top-wind swivel jack to handle up to 5000 lbs, but tongue weight, coupler rating and the trailer manufacturer's own limits are separate figures you need to confirm against your trailer's documentation.
Sources & Methodology
Nothing on this page was installed, loaded, towed or bench-tested — this website runs no lab and does not do hands-on evaluation, and we would rather say that plainly than dress up a spec read as field experience. What we did do is pull the Amazon Creators API verified product records and every product listing feature bullet for all ten ASINs on 2026-09-10, then compare the concrete published values against each other: trimmer positions, wall clearances in inches, backplate adjustment ranges, lifting capacity, clamp versus bolt-on mounting, and exactly which fasteners and locks the seller says are in the box.
For trailer racks, that kind of documentary comparison gets you unusually far, because the buying decision hinges on fitment arithmetic rather than feel — how many tools, how much clearance, whether you can install without drilling. What it cannot tell you is how a powder coat holds up after two seasons of salt and string-trimmer fuel spills, or whether a given clamp base grips your particular rail profile. Those questions belong to the manufacturer's guidance and your own tape measure.