As an Amazon Associate this site earns from qualifying purchases.
Quick Picks
| Product | Best For | Price |
|---|---|---|
| B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2.5" Receiver, Tri-Ball (1-7/8" x 2" x 2-5/16"), 5" Drop, 18,000 GTW - TS20048B | Three coupler sizes on a 2.5-inch receiver | Check Price on Amazon |
| B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2" Receiver, Dual Ball (2" x 2-5/16"), 5" Drop, 10,000 GTW - TS10037B | Half-ton trucks alternating 2" and 2-5/16" couplers | Check Price on Amazon |
| LWCH Adjustable Trailer Hitch for 2 Inch Receiver, 8 Inch Drop/Rise | Lifted trucks that need deep drop with a 2-5/16" ball | Check Price on Amazon |
| TYT Adjustable Tri-Ball Hitch Ball Mount for 2-Inch Receiver | Buyers who want a published tongue weight figure | Check Price on Amazon |
As an Amazon Associate we earn from qualifying purchases. This page contains affiliate links, and we may receive a commission if you buy through them — at no extra cost to you.
As an Amazon Associate, we earn from qualifying purchases.
Last Updated: September 2026
If you tow more than one trailer, the mount is where the compromises show up. A boat trailer with a 2-inch coupler sits at one height, a dump trailer with a 2-5/16-inch coupler sits at another, and a lifted truck makes both of them nose-up. This roundup compares ten adjustable ball mounts strictly on what their listings publish: receiver size, ball sizes, drop and rise range, and gross trailer weight ratings.
Nobody here towed anything. Every number below comes from the manufacturer's own listing copy, and where a listing is silent, this page says so instead of guessing.
Shoppers cross-shopping a specific loaded ball mount such as the CURT 45331 won't find it below; this roundup covers adjustable-height mounts only.
- ADJUSTABLE – The Tow & Stow Adjustable Ball Mount Trailer Hitch is adjustable in height for level towing. Simply pull the two stainless steel adjustment pins to raise or lower the
- STOWABLE & SECURE: Keep your hitch handy but out of the way. When you're not towing, stow the Tow & Stow Adjustable Ball Mount right where you'll need it next. Just rotate the
- ADJUSTABLE – The Tow & Stow Adjustable Ball Mount Trailer Hitch is adjustable in height for level towing. Simply pull the two stainless steel adjustment pins to raise or lower the
- STOWABLE & SECURE: Keep your hitch handy but out of the way. When you're not towing, stow the Tow & Stow Adjustable Ball Mount right where you'll need it next. Just rotate the
- 【8-Inch Drop/Rise for Lifted Trucks】 Engineered with an 8-inch adjustable drop and rise across 8 calibrated positions. This heavy-duty drop hitch is specifically designed to
- 【12,500 LBS Heavy Duty Capacity】 Equipped with dual premium chrome-plated steel balls. The 2" ball delivers an 8,000 lbs GTW capacity, while the 2-5/16" ball provides a massive
- All-in-One Tri-Ball Convenience: Three ball sizes (1-7/8", 2", 2-5/16") let you tow multiple trailers without swapping mounts; suitable for mixed fleets and seasonal towing
- Height Adjustability: 5" rise/drop adjustment for level towing and safer handling; quick to reposition for different vehicle/trailer height combinations
- ADJUSTABLE – The Tow & Stow Adjustable Ball Mount Trailer Hitch is adjustable in height for level towing. Simply pull the two stainless steel adjustment pins to raise or lower the
- STOWABLE & SECURE: Keep your hitch handy but out of the way. When you're not towing, stow the Tow & Stow Adjustable Ball Mount right where you'll need it next. Just rotate the
- ADJUSTABLE – The Tow & Stow Adjustable Ball Mount Trailer Hitch is adjustable in height for level towing. Simply pull the two stainless steel adjustment pins to raise or lower the
- STOWABLE & SECURE: Keep your hitch handy but out of the way. When you're not towing, stow the Tow & Stow Adjustable Ball Mount right where you'll need it next. Just rotate the
- No More Hitch Sizing Stress: Orion Motor Tech's trailer hitch ball mount comes with a standard 2 in. receiver, 2 in. ball, 9-1/2 in. drop, and 8-1/4 in. rise for secure towing
- Take on Any Haul: This Class III towing hitch is rated for 8,000 lb. GTW and SAE J684 tested for safety. Tow your fully loaded F-150 across the country or haul your next big
- HIGH QUALITY: METOWARE adjustable trailer hitch ball mount is constructed by alloy steel to offer dependable strength, which can hold up to 7,500 pounds of gross trailer weight
- ADJUSTABLE TRAILER HITCH: Our adjustable trailer hitch features 6 pin holes and can be turned upside down, offering a 9-1/2" drop depth and 8-1/4" rise height for flexible
Quick Comparison Table
| Model | Receiver | Ball sizes published | Height adjustment | Published GTW |
|---|---|---|---|---|
| B&W TS20048B | 2.5" | 1-7/8", 2", 2-5/16" | 5" drop | 18,000 lbs |
| B&W TS20037B | 2.5" | 2", 2-5/16" | 5" drop | 18,000 lbs |
| B&W TS10037B | 2" | 2", 2-5/16" | 5" drop | 10,000 lbs |
| B&W TS10048B | 2" | 1-7/8", 2", 2-5/16" | 5" drop | 10,000 lbs |
| TYT Tri-Ball | 2" | 1-7/8", 2", 2-5/16" | 5" rise/drop | 10,000 lbs |
| LWCH 8 Inch Drop/Rise | 2" | 2", 2-5/16" | 8" drop and rise, 8 positions | 8,000 lbs / 12,500 lbs by ball |
| Orion Motor Tech | 2" | 2" | 9-1/2" drop, 8-1/4" rise | 8,000 lbs |
| METOWARE | 2" | Not stated in the supplied listing | 9-1/2" drop, 8-1/4" rise | 7,500 lbs |
| OPENROAD B08DRML49G | 2" | Accepts 1-7/8", 2", 2-5/16" | 9-1/2" drop, 8-1/4" rise | 7,500 lbs |
| OPENROAD B081SQ51JF | 2" | 2" ball | 9-1/2" drop, 8-1/4" rise | 7,500 lbs |
B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2.5" Receiver, Tri-Ball (1-7/8" x 2" x 2-5/16"), 5" Drop, 18,000 GTW - TS20048B — Best for three coupler sizes on a 2.5-inch receiver
This is the configuration that solves the mixed-fleet problem outright. B&W's listing describes this model as fitting a 2.5" receiver with a tri-ball head covering 1-7/8", 2" and 2-5/16", a 5" drop, and an 18,000 lbs GTW rating. Rotate the head, pick your ball, pin it, go.
B&W states that height is changed by pulling two stainless steel adjustment pins to raise or lower the hitch, and that the ball assembly rotates to swap between ball sizes. That matters more than it sounds: if you can change ball size without unbolting anything, a Saturday with two trailers stops being a wrench job.
The stow function is the other reason people buy this family. B&W says the hitch can be rotated under the vehicle and re-pinned when not towing, and that once the hitch is locked in most receivers, the adjustable arm cannot be removed. Treat that as an anti-theft design claim from the manufacturer, not an independent security certification.
Pros
- The B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2.5" Receiver, Tri-Ball (1-7/8" x 2" x 2-5/16"), 5" Drop, 18,000 GTW - TS20048B (B000I1W6NU) is listed with a tri-ball head of 1-7/8", 2" and 2-5/16".
- Highest published GTW in this group at 18,000 lbs, tied with the TS20037B.
- B&W lists an e-coat plus black powder coat finish over American-made steel construction.
- Backed by B&W's Limited Lifetime Warranty according to the listing.
- Requires a 2.5" receiver; it will not drop into a standard 2" receiver.
- The listing publishes a 5" drop, less range than the 9-1/2" drop models here.
- The supplied listing information does not state a tongue weight rating.
B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2.5" Receiver, Dual Ball (2" x 2-5/16"), 5" Drop, 18,000 GTW - TS20037B — Best for heavy dual-ball towing on a 2.5-inch receiver
Same receiver size, same rating, fewer balls. B&W's listing describes this model as fitting a 2.5" receiver with a dual ball head of 2" and 2-5/16", a 5" drop, and an 18,000 lbs GTW rating. If nothing in your yard uses a 1-7/8" coupler, the third ball is dead weight and this is the cleaner head.
Mechanically it follows the same recipe: two stainless steel adjustment pins for height, a rotating ball assembly for size changes, and the option to stow the arm under the vehicle when you are done. B&W also states that the finish combines an e-coat with a black powder coat.
Here's the thing about the 2-5/16" ball on an 18,000 lbs-rated mount: the mount is only one link in the chain. Your receiver, hitch class and vehicle tow rating each carry their own limit, and the lowest of those governs.
Pros
- 18,000 lbs GTW published rating, the highest tier in this comparison.
- Dual ball layout covers the two most common heavy-trailer coupler sizes.
- Stows under the vehicle after towing, per B&W's description.
- Limited Lifetime Warranty per the listing.
- No 1-7/8" ball, unlike the tri-ball TS20048B.
- Needs a 2.5" receiver.
- Tongue weight is not stated in the supplied listing information.
B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2" Receiver, Dual Ball (2" x 2-5/16"), 5" Drop, 10,000 GTW - TS10037B — Best for half-ton trucks alternating between 2" and 2-5/16" couplers
This is the dual ball drop hitch most 2-inch-receiver owners are actually searching for. B&W's listing describes this model as fitting a 2" receiver with a dual ball head of 2" and 2-5/16", a 5" drop, and a 10,000 lbs GTW rating.
The 10,000 lbs figure is a real ceiling worth respecting. Against the 18,000 lbs 2.5"-receiver models above, this one is rated for 8,000 lbs less, which is the price of fitting the smaller receiver almost every half-ton truck and SUV ships with.
The convenience story is unchanged. Two stainless steel adjustment pins set the height, the ball assembly rotates to change sizes, and the arm can be stowed under the vehicle so it stops finding your shin in the garage.
Pros
- Fits the 2" receiver found on most light-duty tow vehicles.
- Handles 2" and 2-5/16" couplers without swapping hardware.
- B&W lists high-strength American-made steel with a two-layer protective finish.
- Limited Lifetime Warranty per the listing.
- 10,000 lbs GTW, well below the 18,000 lbs 2.5" versions.
- The published 5" drop may not level a heavily lifted truck.
- Tongue weight is not stated in the supplied listing information.
B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2" Receiver, Tri-Ball (1-7/8" x 2" x 2-5/16"), 5" Drop, 10,000 GTW - TS10048B — Best for 2-inch receivers facing three coupler sizes
B&W's listing describes this model as fitting a 2" receiver with a tri-ball head covering 1-7/8", 2" and 2-5/16", a 5" drop, and a 10,000 lbs GTW rating. It is the TS10037B with the small-ball problem solved.
That 1-7/8" ball earns its keep on older utility trailers, small boat trailers and pop-up campers. If you have ever driven home for a different ball, this is the version to buy.
Same adjustment method as the rest of the family: pull the two stainless steel pins, reset the height, rotate the head for ball size. B&W also states the whole assembly is manufactured and assembled in Humboldt, Kansas.
Pros
- All three common ball sizes on a 2" receiver mount.
- Rotating head changes ball size without removing the mount hardware.
- Anti-theft design claim: locked in most receivers, the adjustable arm cannot be removed.
- Limited Lifetime Warranty per the listing.
- 10,000 lbs GTW caps it below the 2.5" receiver models.
- 5" drop only, which is modest next to the 9-1/2" drop mounts here.
- Tongue weight is not stated in the supplied listing information.
TYT Adjustable Tri-Ball Hitch Ball Mount for 2-Inch Receiver — Best for buyers who want a published tongue weight number
TYT is the one listing in this group that publishes both figures a towing spreadsheet needs. The listing rates it at 10,000 lbs GTW and 1,000 lbs tongue weight. Most listings here stop at GTW, which leaves you guessing on the number that actually loads your rear axle.
The head carries three ball sizes at 1-7/8", 2" and 2-5/16", and TYT states the rotating tri-ball design allows switching between ball sizes without removing the mount from the receiver. Height adjustment is listed as 5" rise/drop.
Security and construction claims come from the seller: a heavy-duty hitch pin lock plus tri-pins, and CNC-machined and welded steel construction with a corrosion-resistant finish. Take those as listing claims rather than verified test results.
Pros
- Publishes 1,000 lbs tongue weight alongside its 10,000 lbs GTW rating.
- Three ball sizes cover mixed-fleet and seasonal towing.
- Ball selection without pulling the mount from the receiver.
- Includes a hitch pin lock and tri-pins per the listing.
- 5" rise/drop range is narrower than the 9-1/2" drop models here.
- Fits a standard 2" receiver only.
- The listing does not cite an independent certification for its strength claims.
LWCH Adjustable Trailer Hitch for 2 Inch Receiver, 8 Inch Drop/Rise — Best for lifted trucks pulling a 2-5/16" coupler
LWCH lists an 8-inch adjustable drop and rise across 8 calibrated positions, aimed at leveling trailers behind lifted trucks, SUVs and heavy-duty haulers. That is the widest published height range among the dual-ball options in this roundup.
Capacity is split by ball, which is honest and worth reading carefully. The LWCH Adjustable Trailer Hitch for 2 Inch Receiver, 8 Inch Drop/Rise (B0GKFXYQFG) listing states the 2" ball delivers an 8,000 lbs GTW capacity and the 2-5/16" ball provides a 12,500 lbs GTW capacity. In practice that means your ceiling changes depending on which coupler you hooked up this morning.
The listing describes aerospace-grade aluminum alloy with reinforced chrome steel and two high-strength stainless steel locking pins with all-weather dust covers. It also notes fitment for 2-inch receivers, with heavy-duty trucks needing a 2.5" to 2" reducer adapter, and it tells you to measure your receiver before buying. Do that.
Pros
- 8-inch drop and rise across 8 calibrated positions for lifted setups.
- 12,500 lbs GTW with the 2-5/16" ball, the highest 2"-receiver figure here.
- Two stainless steel locking pins with dust covers included.
- The LWCH Adjustable Trailer Hitch for 2 Inch Receiver, 8 Inch Drop/Rise (B0GKFXYQFG) listing describes dual premium chrome-plated steel balls in 2" and 2-5/16".
- Capacity drops to 8,000 lbs when the 2" ball is in use.
- Heavy-duty trucks with 2.5" receivers need a reducer adapter.
- Tongue weight is not stated in the supplied listing information.
Orion Motor Tech Adjustable Trailer Hitch Ball Mount - 2" Receiver & Ball — Best for a single-ball setup with a cited test standard
Orion Motor Tech lists a 2 in. receiver, 2 in. ball, 9-1/2 in. drop and 8-1/4 in. rise. Same deep adjustment range as the OPENROAD and METOWARE units, but with one detail those listings do not offer.
That detail: the listing describes it as a Class III towing hitch rated for 8,000 lb. GTW and SAE J684 tested. Note the phrasing carefully. That is the seller stating the product was tested to that standard, not a third-party certificate you can look up, and the listing does not name an independent lab.
Materials are specified more precisely than most: a powder-coated hitch arm and a zinc-plated 40Cr steel ball. Orion also says each locking pin is an anti-theft lock keyed to one key, and that the pre-assembled unit needs no tools to install.
Pros
- 9-1/2 in. drop and 8-1/4 in. rise for wide height matching.
- The Orion Motor Tech Adjustable Trailer Hitch Ball Mount - 2" Receiver & Ball (B0FHHGP8V9) listing states an 8,000 lb. GTW rating.
- Names the ball material as zinc-plated 40Cr steel.
- Ships pre-assembled and installs without tools per the listing.
- Only a 2" ball is listed, so 2-5/16" couplers are out.
- The SAE J684 claim is the seller's own, with no named certifying body.
- Tongue weight is not stated in the supplied listing information.
METOWARE 2" Adjustable Trailer Hitch Ball Mount 9-1/2" Drop and 8-1/4" Rise — Best for a Class IV-listed deep drop channel mount
METOWARE's listing describes an alloy steel mount holding up to 7,500 pounds of gross trailer weight, with 6 pin holes and an invertible design giving 9-1/2" drop depth and 8-1/4" rise height. The channel-and-platform layout means you slide the platform along the channel to set height rather than rotating a head.
Compatibility is stated as any 2"x2" receiver, including Class III and Class IV hitch receivers. Careful reading matters here: a Class IV receiver can accept it, but the mount's own 7,500 lbs ceiling still governs your load.
The listing also mentions a triangular cushion under the shank intended to strengthen stability, plus a high-strength steel and powder coat finish for corrosion resistance. Ball sizes are not stated in the supplied listing information, so confirm what ships in the box before ordering.
Pros
- 9-1/2" drop and 8-1/4" rise from 6 pin holes plus an invertible shank.
- Listed as compatible with Class III and Class IV hitch receivers.
- Powder coat finish over high-strength steel for corrosion resistance.
- Slide-and-pin height changes without swapping mounts between vehicles.
- 7,500 lbs GTW is the lowest tier in this comparison.
- Ball sizes are not stated in the supplied listing information.
- No lock or locking pin is mentioned in the supplied listing information.
OPENROAD Adjustable Trailer Hitch Ball Mount for 2-Inch Receiver — Best for a deep-drop mount with a 1-inch ball hole
This OPENROAD variant is built around a 1-inch trailer ball hole that, per the listing, accommodates 1-7/8 inch, 2 inch and 2-5/16 inch balls. That is a different approach from a tri-ball head: instead of rotating between three welded balls, a ball with a 1-inch shank bolts into the platform.
Height range matches the deep-drop group at 9-1/2" drop and 8-1/4" rise, and OPENROAD rates it at 7500 lbs gross trailer weight. The listing also says pins hold hitch balls in place and allow a quick change-out system.
The honest tradeoff is that which balls are included is not stated in the supplied listing information for the OPENROAD Adjustable Trailer Hitch Ball Mount for 2-Inch Receiver (B08DRML49G), so confirm what ships in the box with the seller before ordering. The OPENROAD Adjustable Trailer Hitch Ball Mount for 2-Inch Receiver (B081SQ51JF is a separate product; this one is B08DRML49G) is itself rated for 7500 lbs gross trailer weight, and that figure covers the mount only; check the published rating of whichever ball you fit and stay within the lower of the two.
Pros
- 1-inch ball hole accepts 1-7/8", 2" and 2-5/16" balls per the listing.
- 9-1/2" drop and 8-1/4" rise covers a wide range of vehicle heights.
- Black powder coating listed for rust, corrosion and UV resistance.
- Quick change-out pin system for the ball platform.
- 7500 lbs GTW rating is the lowest tier here.
- Which balls are included is not stated in the supplied listing information.
- The supplied listing information for the OPENROAD Adjustable Trailer Hitch Ball Mount for 2-Inch Receiver (B08DRML49G) does not address lock or anti-theft hardware, so confirm with the seller whether any is included.
OPENROAD Adjustable Hitch Ball Mount with 2" Ball for 2-Inch Receiver — Best for a ready-to-tow 2-inch ball with a lock in the box
The OPENROAD Adjustable Hitch Ball Mount with 2" Ball for 2-Inch Receiver (B081SQ51JF) is listed with a 2" ball for a 2-inch receiver, a rating of 7500 lbs gross trailer weight, and a 9-1/2" drop and 8-1/4" rise range.
The OPENROAD Adjustable Hitch Ball Mount with 2" Ball for 2-Inch Receiver (B081SQ51JF) listing states that each hitch ball mount includes a combination of a set of lock and two keys. The supplied listing information for the OPENROAD Adjustable Hitch Ball Mount with 2" Ball for 2-Inch Receiver (B081SQ51JF) is inconsistent about shank material, describing the mount as constructed from quality steel in one bullet and referring to an aluminum shank in another, so ask OPENROAD for authoritative confirmation before relying on either material claim.
The supplied listing information for the OPENROAD Adjustable Hitch Ball Mount with 2" Ball for 2-Inch Receiver (B081SQ51JF) does not publish a torque figure, though it does give an installation procedure for the trailer ball nut: tighten the nut under the trailer ball with a tool, and make sure the open screw above it is level when fully tightened. Follow the manufacturer's supplied instructions and torque specification for fastening the ball, and check that all parts are secure before towing.
Pros
- Ships with a 2" ball for a 2-inch receiver, ready to hook up.
- Includes a lock set with two keys per the listing.
- 9-1/2" drop and 8-1/4" rise for leveling taller or lower tow vehicles.
- Black powder-coated finish listed for corrosion and UV resistance.
- 7500 lbs GTW rating is the lowest tier in this group.
- Only a 2" ball is described, so 2-5/16" couplers need separate hardware.
- No torque specification appears in the supplied listing information.
What to Look For in an Adjustable Ball Mount
1. Receiver size first, everything else second. A 2.5" receiver mount will not fit a 2" receiver, and vice versa. Two of the B&W models here are listed for a 2.5" receiver, while the rest are listed for 2" receivers. LWCH notes that heavy-duty trucks with larger receivers need a 2.5" to 2" reducer adapter.
2. Ball sizes you actually use. The TYT Adjustable Tri-Ball Hitch Ball Mount for 2-Inch Receiver (B0DG1WVRBS) listing states three ball sizes of 1-7/8", 2" and 2-5/16". The B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2" Receiver, Tri-Ball (1-7/8" x 2" x 2-5/16"), 5" Drop, 10,000 GTW - TS10048B (B000S0N2RU) is listed with a tri-ball head of 1-7/8", 2" and 2-5/16". Dual ball heads drop the smallest. A single-ball mount is fine until you borrow a trailer.
3. Drop and rise range versus your ride height. The B&W and TYT mounts here publish 5" of adjustment; the OPENROAD, METOWARE and Orion mounts publish 9-1/2" drop and 8-1/4" rise; LWCH publishes 8 inches of drop and rise. Level towing is a handling and braking issue, not a cosmetic one.
4. GTW is a ceiling, not a target. Published GTW ratings differ from listing to listing, so read the rating published for the specific model you are buying. Your receiver, hitch class and vehicle tow rating each set their own limit, and you are bound by the lowest one.
5. Tongue weight, when it is published. Only the TYT listing states a tongue weight figure here, at 1,000 lbs. When a listing is silent, ask the manufacturer rather than assuming the mount matches your vehicle's tongue weight limit.
6. Security hardware. Several listings describe locking pins or lock sets. B&W frames its stow position as an anti-theft design; TYT, Orion Motor Tech, LWCH and OPENROAD's B081SQ51JF listing each describe locks or locking pins.
For broader setup context, see our guides on trailer coupler and ball size matching and towing weight ratings explained.
How We Research
This page is built from published specifications, not from towing. For each of the ten mounts, the Amazon Creators API verified product record and the product listing feature bullets were read line by line, then compared on the attributes that decide fitment: receiver size, ball sizes, drop and rise, and gross trailer weight.
Where two listings from the same brand differ, that difference is reported rather than smoothed over. Where a listing does not publish a figure, this page says the supplied listing information does not state it.
Recommendation by Use Case
Mixed fleet on a 2.5-inch receiver: The B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2.5" Receiver, Tri-Ball (1-7/8" x 2" x 2-5/16"), 5" Drop, 18,000 GTW - TS20048B, because it publishes all three ball sizes and an 18,000 lbs GTW rating on a 2.5" receiver.
Mixed fleet on a 2-inch receiver: The B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2" Receiver, Tri-Ball (1-7/8" x 2" x 2-5/16"), 5" Drop, 10,000 GTW - TS10048B, which lists the same three ball sizes at a 10,000 lbs GTW rating.
Two coupler sizes, half-ton truck: The B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2" Receiver, Dual Ball (2" x 2-5/16"), 5" Drop, 10,000 GTW - TS10037B, listed with 2" and 2-5/16" balls and a 10,000 lbs GTW rating.
Lifted truck, heavy trailer: The LWCH Adjustable Trailer Hitch for 2 Inch Receiver, 8 Inch Drop/Rise, for its 8-inch drop and rise across 8 positions and its 12,500 lbs GTW rating with the 2-5/16" ball.
Tongue weight matters to your calculation: The TYT Adjustable Tri-Ball Hitch Ball Mount for 2-Inch Receiver, the one listing here publishing 1,000 lbs tongue weight alongside its 10,000 lbs GTW rating.
Final Verdict
If your receiver is 2.5 inches and your trailers are not identical, the B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2.5" Receiver, Tri-Ball (1-7/8" x 2" x 2-5/16"), 5" Drop, 18,000 GTW - TS20048B is the strongest specification package on this page: three ball sizes, an 18,000 lbs GTW rating, a stow-under-vehicle position and a Limited Lifetime Warranty. Check Price on Amazon
Most readers, though, drive something with a 2-inch receiver. For them the honest split is simple. Need three ball sizes? The TS10048B. Need serious drop for a lifted truck? The LWCH mount and its 8 inches of adjustment. Need a published tongue weight figure? TYT.
What none of these listings can tell you is whether the mount matches your vehicle. Check your receiver size, your hitch class and your tow rating first, then pick from the ratings above.
Frequently Asked Questions
Which mount handles both 2" and 2-5/16" couplers? Several. The B&W dual ball models list 2" and 2-5/16" balls, the B&W and TYT tri-ball models add 1-7/8", and LWCH lists dual chrome-plated steel balls in 2" and 2-5/16".
Can I use these in a 2.5-inch receiver? Only the two B&W models listed for a 2.5" receiver drop straight in. LWCH states that heavy-duty trucks such as the F-250, F-350, Ram 2500 and Silverado 2500HD need a 2.5" to 2" reducer adapter for its mount.
How much drop do I need for a lifted truck? Measure from the ground to the top of your receiver opening and to your trailer coupler, then buy for the difference. LWCH publishes 8 inches of drop and rise across 8 calibrated positions, while the OPENROAD, METOWARE and Orion Motor Tech mounts publish 9-1/2" of drop and 8-1/4" of rise.
Which one is the high tongue weight ball mount? Of these listings, only TYT publishes a tongue weight rating, at 1,000 lbs. The other listings in this comparison publish gross trailer weight but the supplied listing information does not state tongue weight for them, so contact the manufacturer before assuming a figure.
Are these mounts lockable? Several listings describe security hardware. The B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount - Fits 2" Receiver, Tri-Ball (1-7/8" x 2" x 2-5/16"), 5" Drop, 10,000 GTW - TS10048B (B000S0N2RU) listing states that once the hitch is locked in most receivers, the adjustable arm of the hitch cannot be removed. The TYT Adjustable Tri-Ball Hitch Ball Mount for 2-Inch Receiver (B0DG1WVRBS) listing says it includes a heavy-duty hitch pin lock and tri-pins. The LWCH Adjustable Trailer Hitch for 2 Inch Receiver, 8 Inch Drop/Rise (B0GKFXYQFG) listing describes two high-strength stainless steel locking pins with all-weather protective dust covers. The Orion Motor Tech Adjustable Trailer Hitch Ball Mount - 2" Receiver & Ball (B0FHHGP8V9) listing describes each locking pin as upgraded to a high-level anti-theft lock, ready to use with one key. The OPENROAD Adjustable Hitch Ball Mount with 2" Ball for 2-Inch Receiver (B081SQ51JF) listing states each hitch ball mount includes a set of lock and two keys.
Does a higher GTW rating mean I can tow more? No. The mount rating is a ceiling for that component only. Your receiver, hitch class, vehicle tow rating and axle limits each apply separately, and the lowest applicable limit is the one you must respect.
Sources & Methodology
Nothing on this page was towed, weighed, or pulled down a highway by anyone here; this website does no hands-on or laboratory testing, and it does not pretend otherwise. What went into it was a close read of the Amazon Creators API verified product records and product listing feature bullets for all ten mounts, retrieved 2026-09-10, with every receiver size, ball configuration, drop and rise range, and gross trailer weight rating compared side by side and attributed to the manufacturer or seller that published it.
That kind of research is genuinely decisive for this category, because ball mount shopping is a fitment problem before it is a quality problem: receiver size, coupler size and published capacity either match your setup or they do not, and no amount of driving would change those numbers. What it cannot tell you is long-term finish durability or how a given pin feels after a winter of road salt, so treat the ratings here as the starting filter and confirm final fitment against your own vehicle's documentation.