As an Amazon Associate this site earns from qualifying purchases.
Quick Picks
| Pick | Product | Why it fits | Link |
|---|---|---|---|
| Highest published load rating per jack | BAL 24830 Deluxe Telescopic Stabilizing Jacks | The listing rates each jack at 2000 lbs. static load [S3] | Check Price on Amazon |
| Stated height range and included handle | MaxxHaul 50970 Trailer Swing Down Stabilizer Jacks | The MaxxHaul 50970 Trailer Swing Down Stabilizer Jacks (ASIN B0D2CZFS4L) listing states an 18" extended height and a 12" collapsed height. That same listing describes the package as 2 stabilizer jacks and 1 handle [S4] | Check Price on Amazon |
As an Amazon Associate we earn from qualifying purchases. This page contains affiliate links, and we may receive a commission if you buy through them — at no extra cost to you.
As an Amazon Associate, we earn from qualifying purchases.
Last Updated: September 2026
- Easy to install, either bolts or welds to trailer frame
- Works equally well hitched or unhitched
- Sturdy Support: Each stabilizer jack boasts an extended height of 18" and a collapsed height of 12", offering reliable stability to keep your trailer level. With a static load
- Rust-Resistant Design: Coated with black environmentally friendly electrophoretic paint, these stabilizer jacks are built to withstand the elements without succumbing to rust or
Quick Answer
Here's the short version. If your priority is the highest published static load per jack, the BAL set is rated by the listing at 2000 lbs. static load per individual jack, double the MaxxHaul figure [S3]. If your priority is a self-contained kit with a stated extended and collapsed height, the MaxxHaul set publishes a 18-inch extended height, a 12-inch collapsed height, a 1000 lb static load capacity and a 650 lb lift capacity, and it ships with two jacks plus one handle [S4].
The two also differ in how they attach. The BAL listing says the jacks bolt or weld to the trailer frame, which gives an owner with a welder a permanent option [S3]. The MaxxHaul listing says mounting hardware is not included and calls for four 3/8" bolts you supply yourself [S4].
One is not simply a better version of the other. They solve overlapping problems with different numbers attached.
Full Comparison Table
| Feature | BAL 24830 Deluxe Telescopic Stabilizing Jacks | MaxxHaul 50970 Trailer Swing Down Stabilizer Jacks |
|---|---|---|
| Static load, per jack | 2000 lbs. per individual jack [S3] | 1000 lbs [S4] |
| Lift capacity | Not stated in the supplied listing information | 650 lbs [S4] |
| Extended height | Product title for ASIN B000UZWO04 describes Adjustable 24" Jacks; the supplied listing information does not break that figure out into extended vs collapsed height [S3] | 18" [S4] |
| Collapsed height | Not stated in the supplied listing information | 12" [S4] |
| Mounting method | Bolts or welds to trailer frame [S3] | Pre-drilled mounting holes; four 3/8" bolts, not included [S4] |
| Corrosion protection | Rust inhibitive coatings and plating [S3] | Black electrophoretic paint described as rust-resistant [S4] |
| Operating tool | Tool quality speed wrench [S3] | 1 handle included with the set [S4] |
| Hitched/unhitched use | Listing states it works equally well hitched or unhitched [S3] | Not stated in the supplied listing information |
| Quantity | Set of 2 [S3] | Set of 2 [S4] |
| Price | Check Price on Amazon | Check Price on Amazon |
Design & Build Quality
The headline structural difference is the load rating. BAL's listing publishes 2000 lbs. static load per individual jack; MaxxHaul's publishes 1000 lbs static load per jack [S3][S4]. That is a clean two-to-one gap on the one number both manufacturers actually state, and it is the most defensible reason to choose between them.
Be careful about what a static load rating is, though. It is a supporting figure, not a lifting figure. MaxxHaul separates the two explicitly, listing 1000 lbs static load alongside a 650 lb lift capacity [S4]. The supplied BAL listing information does not state a separate lift capacity, so you cannot assume its lifting figure scales with the 2000 lb static number.
Both listings claim corrosion protection, but they describe different approaches. BAL cites rust inhibitive coatings and plating [S3]. MaxxHaul cites black electrophoretic paint it describes as resisting rust and corrosion [S4]. Neither listing supplies a salt-spray hour figure, a warranty length, or any third-party corrosion standard, so treat both as seller claims rather than verified durability results.
Preferred option: BAL, on the strength of the published per-jack static load. Everything else in this category is a claim, not a measured comparison.
Features & Functionality
Here's the thing about the MaxxHaul spec: the MaxxHaul 50970 Trailer Swing Down Stabilizer Jacks listing states both a collapsed and an extended height. You get a stated collapsed height of 12 inches and a stated extended height of 18 inches, which is a 6-inch working range [S4]. That matters more than it sounds. If your frame rail sits so high that 18 inches of extension will not reach the ground, the jack cannot do its job, and MaxxHaul at least tells you where the ceiling is before you buy.
The verified product record for the BAL 24830 Deluxe Telescopic Stabilizing Jacks describes them as a Set of 2 Adjustable 24" Jacks, but the supplied listing information does not break that 24-inch figure out into extended height, collapsed height or travel range, so measure your frame-to-ground clearance and confirm against BAL's own published specifications before ordering [S3].
Operation differs too. BAL includes what its listing calls a durable tool quality speed wrench [S3]. A speed wrench implies a crank-driven screw mechanism, which typically means faster deployment than a short handle, though the supplied information does not state a turns-per-inch figure. MaxxHaul's set includes one handle covering both jacks [S4].
One BAL claim has no MaxxHaul counterpart: the listing states the jacks work equally well hitched or unhitched [S3]. The supplied MaxxHaul listing information does not address hitched versus unhitched use either way, so treat that as an unknown rather than as a limitation.
Preferred option: MaxxHaul, if you need a stated extended and collapsed height before committing. BAL, if the speed wrench and the hitched/unhitched claim matter more to your setup.
Performance
Neither manufacturer publishes deflection figures, cycle counts, or vibration data in the supplied listing information, so a genuine performance comparison is not established here. What you can reason about is headroom.
The BAL 24830 Deluxe Telescopic Stabilizing Jacks listing rates each jack at 2000 lbs. static load per individual jack [S3]. The MaxxHaul 50970 Trailer Swing Down Stabilizer Jacks listing states a static load capacity of 1000 lbs per jack [S4]. Those figures describe the per-jack ratings only. It does not tell you what share of your trailer's weight lands on those two corners, and stabilizer jacks are not designed to carry a trailer's full weight regardless. Check your trailer manufacturer's guidance on stabilizer placement and loading before deciding how many jacks you need.
For safety context on stabilizing and supporting equipment generally, the CPSC publishes consumer product safety information [S1], and USA.gov maintains general consumer protection resources [S2]. Neither publishes a rating for these two specific models.
Preferred option: Not established by the supplied data. The rating gap favors BAL on paper; real-world stability depends on frame geometry, ground surface and placement, none of which either listing addresses.
Price & Value
Both sets are sold as a set of 2 [S3][S4]. Check the current price on Amazon for each before deciding, because the value calculation shifts with whatever the listings show today.
What the specs do let you weigh is total cost of getting installed. MaxxHaul states plainly that mounting hardware is not included and that you will need four 3/8" bolts per its instructions, and it suggests considering a 1/4" spacer between the frame and mounting surface for a snug fit [S4]. That is honest, and it is also a small extra hardware run. BAL's listing says the jacks bolt or weld to the trailer frame but does not state whether hardware is supplied [S3], so budget for fasteners on either set until you confirm.
Preferred option: Not established by the supplied data.
Product Verdicts
BAL 24830 Deluxe Telescopic Stabilizing Jacks — Best for owners who want the highest published per-jack static load
The case here is one number, and it is a strong one: the listing rates each jack at 2000 lbs. static load [S3]. Pair that with the stated bolt-or-weld mounting flexibility and the claim that the jacks work equally well hitched or unhitched, and this reads as the option for a heavier trailer or an owner who wants a permanent welded installation [S3].
Strengths
- 2000 lbs. static load per individual jack, the higher of the two published figures [S3]
- Bolts or welds to the trailer frame, so a welded permanent mount is on the table [S3]
- Includes a tool quality speed wrench for operation [S3]
- Rust inhibitive coatings and plating per the listing [S3]
- The product title for ASIN B000UZWO04 describes Adjustable 24" Jacks, but the supplied listing information does not break that figure out into collapsed height, extended height or travel range, so confirm ground reach against BAL's own published specifications
- No lift capacity figure appears in the supplied listing information, so do not infer one from the static rating
MaxxHaul 50970 Trailer Swing Down Stabilizer Jacks — Best for buyers who need a stated 12-to-18-inch height range before ordering
Honestly, the documentation is the selling point. You know the collapsed height is 12 inches, the extended height is 18 inches, the static load is 1000 lbs per jack and the lift capacity is 650 lbs [S4]. For a lighter trailer where 1000 lbs per corner is plenty, that clarity beats guessing.
Strengths
- Published 12" collapsed and 18" extended heights, so frame clearance can be checked in advance [S4]
- Separate static load (1000 lbs) and lift capacity (650 lbs) figures rather than one blended number [S4]
- The MaxxHaul 50970 Trailer Swing Down Stabilizer Jacks (ASIN B0D2CZFS4L) listing describes the package as 2 stabilizer jacks and 1 handle [S4]
- Pre-drilled mounting holes for a bolt-on install [S4]
- Mounting hardware is not included; four 3/8" bolts are required and not supplied [S4]
- The 1000 lb static load per jack is half the BAL figure [S3][S4]
- The supplied listing information does not address hitched versus unhitched use
Which Should You Buy?
- Heavier travel trailer, or you want welded-on permanence. The BAL set is the one with the 2000 lbs. static load per jack rating and the stated bolt-or-weld mounting option [S3].
- Small utility trailer or lightweight camper, and you need to confirm ground reach first. The MaxxHaul set publishes 12" collapsed and 18" extended, so you can measure your frame height and decide before ordering [S4].
- You want something usable while still hitched. Only the BAL listing states the jacks work equally well hitched or unhitched [S3]. MaxxHaul's supplied information is silent on this, which is an unknown, not a no.
- You want a handle in the box and nothing else to think about tool-wise. The MaxxHaul 50970 Trailer Swing Down Stabilizer Jacks (ASIN B0D2CZFS4L) listing describes the package as 2 stabilizer jacks and 1 handle [S4]. The BAL 24830 Deluxe Telescopic Stabilizing Jacks listing states it includes a durable tool quality speed wrench [S3].
- You are shopping on installation effort. The supplied listing information for the BAL 24830 Deluxe Telescopic Stabilizing Jacks does not state whether mounting hardware is included; it states only that the jacks bolt or weld to the trailer frame [S3]. MaxxHaul spells out the four 3/8" bolt requirement and the optional 1/4" spacer suggestion up front [S4].
How We Research
This site does not perform hands-on testing. For this comparison, both products were pulled from Amazon Creators API verified product records retrieved on 2026-09-10, and every specification cited above comes from those records' own product listing feature bullets. Where a figure is absent from a listing, this article says so rather than substituting a number from memory or from a similarly named model. Manufacturer-published figures are attributed to the manufacturer or the listing that published them, never presented as something observed here.
Final Verdict
If you are forcing a single answer: the BAL 24830 Deluxe Telescopic Stabilizing Jacks set carries the stronger published number, at 2000 lbs. static load per individual jack against MaxxHaul's 1000 lbs [S3][S4]. On the one specification both manufacturers state in the same terms, BAL doubles it. That is a real, checkable advantage and it is why heavier rigs should start there.
But the MaxxHaul 50970 Trailer Swing Down Stabilizer Jacks listing publishes its extended and collapsed height figures. Knowing that a jack collapses to 12 inches and extends to 18 inches, and that it is rated for 650 lbs of lift alongside its 1000 lb static load, lets you verify fit before you spend anything [S4]. The supplied information for the BAL 24830 Deluxe Telescopic Stabilizing Jacks gives a 24" adjustable jack size in its product title without breaking that figure into extended and collapsed heights, so you would need to confirm those with BAL directly against your own frame-to-ground clearance.
Buy on capacity if your trailer is heavy. Buy on documented geometry if your clearance is tight. Do not buy either without measuring your frame first.
Frequently Asked Questions
What is the difference between telescoping and swing-down stabilizer jacks?
Both designs extend a leg toward the ground to steady a parked trailer. The naming in these two listings is not a clean split: the BAL product is described as telescopic and the MaxxHaul product's title uses both "swing down" and "telescoping" [S3][S4]. Rather than choosing on the label, compare the published load ratings and the mounting requirements, which are stated concretely for both.
How much weight can each jack hold?
BAL's listing rates each jack at 2000 lbs. static load per individual jack [S3]. MaxxHaul's listing states a static load capacity of 1000 lbs and a lift capacity of 650 lbs per jack [S4]. Static load and lift capacity are different measurements, and the supplied BAL listing information does not state a lift capacity.
How tall are these jacks when extended?
MaxxHaul publishes an extended height of 18 inches and a collapsed height of 12 inches [S4]. The BAL 24830 Deluxe Telescopic Stabilizing Jacks product title describes Adjustable 24" Jacks, but the supplied listing information does not break that figure out into extended and collapsed heights, so confirm those with BAL's own published specifications before ordering.
Do either of these sets come with mounting hardware?
MaxxHaul states clearly that mounting hardware is not included and that installation calls for four 3/8" bolts you supply, with an optional 1/4" spacer between the frame and mounting surface [S4]. The supplied BAL listing information does not state whether hardware is included; it states only that the jacks bolt or weld to the trailer frame [S3].
Can I use these jacks while the trailer is still hitched?
The BAL listing states its jacks work equally well hitched or unhitched [S3]. The supplied MaxxHaul listing information does not address this, so it is an open question rather than a stated restriction. Follow your trailer manufacturer's guidance either way.
Will these jacks rust?
BAL's listing cites rust inhibitive coatings and plating, and MaxxHaul's cites black electrophoretic paint described as resisting rust and corrosion [S3][S4]. Neither listing supplies a salt-spray test result or a corrosion warranty, so both statements are manufacturer claims rather than independently verified durability figures.
How many jacks do I need for my trailer?
Neither listing specifies a required quantity for a given trailer; both are sold as a set of 2 [S3][S4]. Consult your trailer manufacturer for placement and quantity guidance, and see the CPSC's consumer product safety resources for general guidance on using support equipment safely [S1].
Sources & Methodology
Nothing on this page came from a garage, a scale or a driveway. This site did not physically or laboratory-test either jack set, and it does not own or handle the products it writes about. What was done instead: both models were pulled as Amazon Creators API verified product records on 2026-09-10, and each manufacturer's own product listing feature bullets were read line by line, with the load ratings, height figures, mounting requirements and coating claims compared against each other and against nothing else. No owner-feedback data was supplied for either model, so no durability or satisfaction trend is claimed here.
That kind of reading gets you a long way with stabilizer jacks specifically, because the decision hinges on published numbers a buyer can check against a tape measure: static load per jack, lift capacity, collapsed and extended height, and bolt size. Where a listing is silent — BAL's extended-versus-collapsed height breakdown, MaxxHaul's hitched-use behavior — this article marks it unknown rather than guessing, and points you to the manufacturer for the rest.